Accessories

Pouring Cone
The Poly Pouring Cone allows you to pour concrete into your form at a steady rate. It eliminates shoveling and scraping concrete into your form. This pouring cone will save labor costs, product costs, and most importantly injury costs. The polyethylene material creates a non-stick surface, which allows for easy flow and cleaning of the Poly Pouring Cone.

Many of our customers buy just extensions, since the top is solid and flat it leaves a enough concrete on top for finishing off the header. This is why we offer the price of the extension only and why we made the cone and extension 2 separate pieces. The two separate pieces can be bolted together to make one complete pouring cone.
Poly End
Poly Ends are designed to fit over the end of cut and exposed wire. The Poly Ends will protect your employees from sharp wire ends. The Poly Ends also protect your expensive forms and protect your hole formers or other products that come in contact with wire ends. The Poly Ends are designed to fit of over wire size .187 to .312.
The Bullet
• Precisely sized to assure fast installation and positive                   retention of ring
• Color provides high visibility in the work environment
• Designed to shear cleanly when the Header is lifted
• Designed to fit 3/8" threaded set screw hole
• One properly sized Bullet fits most header thicknesses
I/I Sealant
I / I Sealant exhibits excellent adhesion to many substrates including aluminum, brass, steel, glass, mortar, concrete, wood, and many plastics. I / I Sealants is highly weather resistant and can be painted with most paints. Contains no solvents or isocyanates and is non-yellowing. Meets all requirements of ASTM C920. Type S, Grade NS, Class 25, Use NT, M, A, G and O. 

• The I / I Sealant comes in a caulking tube of 10.3 FL. OZ
• 30 Tubes per Case
Turn Back
• Finishes off lined pipe/manholes. 
• Made of Polyethylene.
• Available in 24", 27", 30", 34", 48" & 72". 
• Available in Gray and Yellow. 
• Order your choice of Embedment or without Embedment.
Picture
With Embedment
Picture
Without Embedment
Poly Sleeve
Picture
12"x5" Wall Poly Sleeve
Picture
12"x8" Wall Poly Sleeve
Poly Sleeves are made of UV stabilized medium-density polyethylene. These resins offer high stiffness and low temperature impacts, strength, excellent environmental stress crack resistance and wear resistance.

•Liner for Pipe Holes
E-Cone Liner
• Designed to line and E-Centric Cone. 
• Available in Gray or Yellow.
• Creates polyethylene liner for Manhole Cones